WASHINGTON – A 21-year-old female and her two children escaped a home fire today, unharmed; the fire started in the laundry room.
Jim Keith, Washington City Public Safety Director, said the woman tried to shut down the dryer when it caught on fire but she was unharmed in the incident. He said firefighters arrived quickly and were able to contain the fire to the laundry room. He added that the ceiling was damaged in the fire as well.
According to ConsumerReports.org, improper dryer vents are a common safety problem. Here are a few tips to keep your clothes dryer running safely and efficiently.
- Use metal dryer ducts to help prevent dryer fires. Consumer Reports says that flexible dryer ducts made of foil or plastic are the most problematic because they can sag and let lint build up at low points. Ridges can also trap lint. Metal ducts, either flexible or solid, are far safer because they don’t sag, so lint is less likely to build up. In addition, if a fire does start, a metal duct is more likely to contain it. See our dryer venting safety report for more tips as well as photos and a dryer-venting video.
- No matter which kind of duct you have, you should clean it regularly. In addition, remove the visible lint from the lint screen each time you use your dryer. This not only will reduce the risk of a fire, but your clothes will dry faster and your dryer will use less energy. If dryer film is a worry, there is certainly no harm in occasionally cleaning the lint filter with warm soapy water and a small brush.
- Clean inside, behind, and underneath the dryer, where lint can also build up.
- Take special care drying clothes stained with volatile chemicals such as gasoline, cooking oils, cleaning agents, or finishing oils and stains. Wash the clothing more than once to minimize the amount of these chemicals on the clothing, and line dry instead of using a dryer.
- Avoid using liquid fabric softener on all-cotton clothing made of fleece, terry cloth, or velour. In our flammability tests, liquid fabric softener added to rinse water accelerated the burning speed of these fabrics. If you want a softener, use dryer sheets instead.
- Buy dryers that use moisture sensors rather than ordinary thermostats to end the auto-dry cycle. Thermostats can allow the dryer to run longer than necessary.
- Occasionally wipe the sensor with a soft cloth or cotton ball and rubbing alcohol to keep it functioning accurately. Sensors are usually located on the inside of the dryer, just below the door opening, and can be hard to find. They are usually two curved metallic strips, shaped somewhat like the letter “C”.
Visit The Laundry Alternative for more dryer safety tips.
Copyright St. George News, SaintGeorgeUtah.com LLC, 2011, all rights reserved.